The same machine carries more than one name on different sites. In a substation people call it a transformer oil purifier; in an oil handling workshop they call it an insulating oil purifier or a vacuum oil purifier; more precisely still, some call it a two-stage vacuum oil purifier after its structure. The plate type machine is a plate and frame filter press in some places and a board-frame filter press in others; the hand-pushed filtering and filling cart is a cart type oil purifier to one site and a hand-pushed oil filter cart to the next. The variety of names is not the problem in itself; the problem is that the two sides of a conversation often end up talking about different machines.
Laid out, the naming follows three lines: the oil being processed, the working principle and the form of the machine. Along the oil line there are transformer oil, hydraulic oil, lubricating oil and turbine oil; along the principle line there are vacuum degassing, plate and frame filtration, adsorption decolourisation, high-speed centrifugation, mobile work and filter elements as consumables; along the form line there are fixed, mobile, trailer, fully enclosed, canopy and open types.
What each of the three lines settles
The oil line settles whether this machine can handle the oil in front of you: transformer oil and hydraulic oil differ in viscosity, in the form their water takes and in the character of their contaminants, so the applicable oil is the first screen in any selection. The principle line settles how the machine gets the oil clean: vacuum degassing, plate and frame filtration, adsorption decolourisation and high-speed centrifugation remove entirely different things. The form line settles where the machine runs: a fixed type suits long continuous operation, mobile and trailer types follow the maintenance job, and fully enclosed and canopy types answer the protection requirements of an outdoor site.
Crossing the three lines produces the dozen or so models on sale. Map the name you hear on site onto those three lines, and the remaining parameters and conditions become easy to discuss.
The same name may cover different machines
The four words vacuum oil purifier cover models that differ a great deal. The ZYD-100 handles 6000 L/h, the TYA-50 2000 L/h and the TYA-100 4000 L/h, while the TYG-100 also handles 6000 L/h but in mobile form. On filtration accuracy the ZYD series is ≤1 μm, the TYA series ≤1–5 μm and the JL series cart ≤10–25 μm. Report one name and one flow rate and everything else stays undefined.

| Name in use on site | What the name is based on | What to check in the product catalogue |
|---|---|---|
| Transformer oil purifier | The oil | Applicable oils and voltage class; the name of the machine is not enough |
| Insulating oil purifier | The oil | Instrument transformer oil, capacitor oil and similar belong to this group as well |
| Two-stage vacuum oil purifier | The principle and the number of stages | Working vacuum and ultimate vacuum |
| Plate and frame filter press / board-frame filter press | The structure | Number of frames and the frame size |
| Cart type oil purifier / hand-pushed oil filter cart | The form | Filtration accuracy and flow rate |
| Decolourising unit / adsorption oil purifier | The principle | Adsorption medium and the differential pressure across it |
Write four things down when you enquire and order
Once the wording is aligned, the conversation gets much faster. In a technical agreement or an enquiry, write down four things: the model, the technical route, the applicable oil and the way the indicators are expressed. Give the model as a single identifier such as ZYD-100; state the technical route as vacuum degassing, plate and frame filtration or centrifugal separation; name the applicable oil as transformer oil or hydraulic oil; and state whether the requirement is filtration accuracy or cleanliness.
- Do not set a filtration accuracy of 1 μm against a cleanliness of class 5; they are two different indicators.
- Do not use a rated flow rate as if it were the actual throughput: the flow rate is a figure for given conditions, and the actual throughput is lower when the oil on site is dirtier.
- Do not say only that it is mobile: there is a difference between trailer type and hand-pushed, and the power supply and the way it is fixed differ with it.

The names may vary, but four things in a technical agreement have to be unambiguous: the model, the technical route, the applicable oil and the way the indicators are expressed.
