Every article on this site ends with a byline, and there are only two values for it: Yanneng Technical Team or Yanneng Editorial Team. This is not filled in at random; it decides whether a reader is able to treat the article as a basis for action.
An article signed by the Yanneng Technical Team takes its technical content directly from the product documentation and from site data: what the parameters are, which standard each indicator is referenced to, how the assembly and the interlock logic work, and what to do on site after a protection has operated. Every number in such an article comes from the product documentation itself, with nothing inferred and nothing written as approximately equal to a figure, and the technical team stands behind the conclusions.
An article signed by the Yanneng Editorial Team is about products, documents, processes and the writing itself: product updates, industry news, changes to the sections and the versions, the way we work internally and how a draft is reviewed. This kind of article gives no technical conclusion; it sets out the facts and the practice.
The byline and the category are two different things
It needs to be said that the byline is not the category. Within product updates there are articles from the editorial team and articles from the technical team, and the same is true of industry news and company profile. The category says which section of the site an article belongs to; the byline says who is responsible for the content. The technical team also writes product updates and the editorial team also writes industry news; there is no contradiction in that.
There is a further difference in the content itself. The technical team works to one firm rule: only real figures are used, and none of them is inferred; no other company in the industry is named; and where selection is discussed, conditions are given rather than conclusions, with the circumstances under which to choose what stated plainly and no claim that one machine should be used in every situation. Those three rules are what make a technical article checkable.
Why the figures have to be checkable
Every figure in a technical article should lead back to the product parameter table or to the reference standard: the flow rate to the parameter table, the working vacuum of -0.08 ~ -0.0999 MPa to the parameter table, the water content of ≤3 ppm to GB/T 7600, the breakdown voltage of ≥65 kV to GB/T 507, the cleanliness of NAS 1638 class 5 to NAS 1638. Where they do not agree, the product documentation is the reference, and the correction process works the same way.
This is why the bylines are separated. Parameters change when a product is revised and the articles are updated with them, but every conclusion has a basis behind it, which is what gives the reader a basis for judgement instead of a choice between believing and not believing.

| Byline | What these articles cover | What a reader can do with them | What they cannot be used for |
|---|---|---|---|
| Yanneng Technical Team | Parameters, indicators, reference standards, assembly and interlocks, the order of a fault check | Check the conditions against the site and judge whether an action should be taken | Treating them as a general conclusion and applying them to conditions that have not been confirmed |
| Yanneng Editorial Team | Product updates, documents and processes, sections and versions, the way we work | Understand what the products and the site offer and how those documents are to be used | Treating them as a technical reference in place of confirmation on site |
How a reader can use the byline
- Read the byline first, and only then decide whether the article can enter your technical judgement.
- The figures that appear in a technical article can be checked against the product parameter table and the reference standards; where they do not match, the parameter table is the reference.
- Read the editorial articles the way you read product documentation, and be clear about who to go to for confirmation next.
- Both kinds of article welcome corrections, and the revision process sets out how a correction is made.

The byline is not the name of the author; it is who is responsible for the article. A technical article can be checked against the documentation; an editorial article cannot.
