On a purchase evaluation sheet, next to price and parameters, there is one more class of question that gets asked quite precisely: can this machine be repaired? The question itself cannot be answered with a single figure, but it can be broken into several questions that can be checked on the spot, and the answer is then in the documents.

Maintainability ends up in three things

The first is spare parts. For the wear parts other than consumables: can they be bought by model, and is the part that arrives the same specification as the one fitted on the machine? The standard configuration of the ZYD-100 is 5 pieces of the 150-500-5 fine element in parallel, and the coarse elements 150-250-50 and 110-250-50 as well as the second stage element 110-400-20 are listed as well. These model numbers are written in both the parameter sheet and the accompanying documents, and whether they can be ordered directly against those numbers is the most practical of these questions.

The second is the set of documents. The circuit diagram, the installation drawing, the parameter page, the wear parts list, the certificate and the test records: are they all there? Whether the paperwork is complete decides how far the site can take the fault on its own when the machine fails.

The third is the space for dismantling. The dimensions of the ZYD-100 are 1200×1400×1800 mm and the weight is approx. 720 kg. Whether the machine can be moved into the equipment room, whether a person can stand in front of the cabinet once the door is open, and whether a filter housing can be drawn out on its own for element replacement: none of that can be read off a drawing, it has to be measured on site.

These three things have one thing in common: none of them is on the quotation, and none of them is on the parameter sheet. The quotation and the parameter sheet say what this machine can do, while these three say what a person can still do when the machine is stopped. The second kind is invisible at the stage of purchase and only becomes visible after the machine has run for years, so asking about it early saves the trouble.

The 150-500-5 fine element for the ZYD-100
The last step of maintainability usually falls on the consumables: with the model number written down, the order cannot go wrong
Questions that can be checked on the spotWhere the answer is written downWhat to do when it does not match
Can the wear parts be ordered directly by model numberThe wear parts list and the element specifications in the accompanying documentsAsk for the model number, the quantity and the purpose to be completed
How far can the site get on its own when a fault appearsThe circuit diagram and the installation drawingAsk for the full versions rather than simplified drawings
How much has to be opened up to change an elementThe installation drawing and the dimensionsConfirm against the service space measured on site
What if the machine will not fit into the equipment roomThe dimensions 1200×1400×1800 mmState the access route and the door opening in the contract

How to put it into the technical agreement

A phrase like it should be easy to maintain cannot be executed and offers no method of acceptance. A usable way is to turn the questions above into clauses: the accompanying documents shall include the circuit diagram, the installation drawing, the parameter page and the wear parts list; the wear parts list shall state model number, quantity and replacement condition; the accompanying documents shall agree with the nameplate on the machine. Each of them can be checked against the real thing on the day of delivery.

Clauses of this kind bind the supplier as well. Writing the documents down clearly means guaranteeing that the documents match the machine, and writing the wear part numbers down means keeping those parts available over the long term. Whether they are written decides how far someone has to travel on the day the machine fails.

Three conditions that are easily skipped during an evaluation

  • The power condition. The machine is three-phase 380V / 50Hz, and whether the incoming capacity matches the distribution capacity on site is often noticed only when the machine arrives.
  • The ambient conditions. The applicable ambient temperature is -20–45 °C, and altitude also affects the vacuum level; both conditions have to be pinned down to the actual location.
  • The oil condition. With a high water content the upper limit of the temperature control is pressed down to 70 °C, and the configuration of the machine is not the same for every type of oil.
The answer to whether a machine can be repaired is not in the sales talk but in the documents and the spare parts list. Ask the question at the level where it can be checked against the real thing.